High Purity – PP
Pleated Polypropylene Cartridge

Pleated Polypropylene Cartridges are designed for use in most applications where absolute rated pleated filtration is needed. Designed to hold 6.5 square feet of filtration media, our High Purity – PP Cartridge is a great value. These cartridges are constructed with 100% polypropylene materials and assembled using the latest thermal bonding equipment.

Flow Rate

Typical Applications

Food & Beverage
Photographic
Deionized Water
R.O. Membrane
Prefiltration

Process Water
Fine Chemicals
Plating Chemicals
Wastewater

Construction Materials
Filtration Media .......................Polypropylene
Support Media .........................Polypropylene
End Caps ...................................Polypropylene
Center Core .............................Polypropylene
Outer Support Cage ...............Polypropylene
O-rings/Gaskets ..........Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton

Sanitization/ Sterilization
Filtered Hot Water .............80°C for 30 Minutes
Steam Sterilization .....121° for 30 min, multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions
Length:
10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter:
2.70 inches (7.0 cm) nominal

Maximum Recommended
Operating Conditions
Change Out ................................. ∆ P-35PSI
Temperature ................................ 176°F (80°C)

FDA listed materials
Manufactured from materials which are listed for food contact applications in title 21 of the U.S. Code of Federal Regulations.

Toxicity
All polypropylene components meet the specifications for bilogical safety per USP Class VI - 121 C for plastics.

PP	(Pore Size)	A	(Length)	C	(End Cap Code)	O-Rings/ Gaskets	Adders
	0.2		10 (25.4 cm)		2 = DOE - Flat Gasket	B = Buna	I = Stainless Steel Insert
	0.45		20 (50.8 cm)		3 = 222 w/ Fin	E = EPDM	HP = Heavy Poly Core
	1.0		30 (76.2 cm)		4 = 222 w/Flat Cap	S = Silicone
	2.0		40 (101.6 cm)		5 = 222 w/ Spring	V = Viton
	5.0				6 = 226 w/Flat Cap	T = Teflon Encapsulated Viton
	10.0				7 = 226 w/Fin
	20.0				8 = 226 w/ Spring
	40.0

Ordering Information