High Purity – FG
Pleated Microfiberglass Cartridge

Pleated Microfiberglass Cartridges offer an economical, absolute rated, filtration solution for both liquids and gases. They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles.
High Purity - FG Cartridges are constructed with absolute rated borosilicate microfiberglass media that offers high dirt-loading capacities. The natural positive charge of the glass fiber also aids in the retention of negatively charged particulates such as bacteria, endotoxin , and a variety of colloidal materials. Efficiency ratings to 99.98% (Beta 500).

Flow Rate

Typical Applications

Membrane	R.O. Prefiltration
Prefiltration	Wine Clarification
Sterile Air	Aromatic
Corn Syrup	Hydrocarbons

Construction Materials
Filtration Media-FDA Borosilicate Microfiberglass with acrylic binder.
Support Media-Spun-bonded polyester laminated on both upstream and downstream sides.
End Caps .......................................Polypropylene
Center Core .......................................Fiberglass
Outer Support Cage ...................Polypropylene
O-rings/Gaskets ....Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton
Note: Contact factory for information on high-temperature stainless construction options.

Sanitization/Sterilization
Filtered Hot Water..............80°C for 30 Minutes
Steam Sterilization....121°C for 30 min, multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions
Length:
10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter:
2.70 inches (7.0 cm) nominal

Maximum Recommended
Operating Conditions
Change Out...........................................Δ P-35 PSI
Temperature ....................................200°F (93°C)
Note: Optional High Temperature Construction available.

FDA listed materials
Manufactured from materials which are listed for food contact applications in title 21 of the U.S. Code of Federal Regulations.

Toxicity
All polypropylene components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

GEPES	Pore Size	A	Length	C	End Cap Code	O-Rings/ Gaskets	Adders
	0.45		10 (25.4 cm)		2 = DOE - Flat Gasket	B = Buna	I = Stainless Steel Insert
	1.0		20 (50.8 cm)		3 = 222 w/ Fin	E = EPDM
	2.0		30 (76.2 cm)		4 = 222 w/Flat Cap	S = Silicone
	5.0		40 (101.6 cm)		5 = 226 w/Spring	V = Viton
	10.0				6=226 w/Flat Cap	T = Teflon Encapsulated Viton
	20.0				7 = 226 w/Fin
	40.0				8=226 w/Spring
					16 = 213 Internal O-Ring

Ordering Information